Table of Contents
Advertisement
¤ Insert the plastic cover provided for the
headset socket to ensure optimum sound
in speaker mode.
Attaching the belt clip
The handset has notches on each side to attach the belt clip.
¤ To attach – press the belt clip
onto the back of the handset so
that the protrusions on the belt
clip engage with the notches.
¤ To remove – press the centre of
the belt clip firmly with your right
thumb, push the fingernail of
your left index finger up between
the clip and the housing and pull
the clip in an upward direction.
Placing the handset on the base
¤ Place the handset in the base with its display facing forward.
Each handset is registered with the base at the factory. You do not need to register
the handset again. If you wish to use your handset with a different base or use addi-
tional handsets with your base, you have to register the handset manually
¢ page 59.
To charge the batteries, leave the handset in the base.
Please note
The handset may only be placed in the base provided for it.
First steps
11
Advertisement
Table of Contents
