Setting The Date And Time - Gigaset SX790 ISDN User Manual

First steps

Setting the date and time

Set the date and time so that the correct date and time can be assigned to incoming
calls, and so that the alarm can be used.
Please note
Your telephone updates the date and time from the ISDN network the first time
you make an external call.
Date:
31.01.2010
Time:
00:00
Back
¤ Enter the hours and minutes in
4-digit format via the keypad,
e.g., QM 5 for 07:15 am.
Change the input position with
the control key if necessary.
14
Calls Time
Date/Time
Save
¤ Press the key below
play screen to open the input field.
(If you have already set the time and
date, open the input field via the menu
¢ page 31.)
The Date/Time submenu is shown on the
display.
¤ The active input position flashes.
Enter day, month and year as an
8-digit number via the keypad,
e.g., 4 Q
2Q Q for 14/10/2010.
Press the right or left control key
to change the input position and
correct an entry.
¤ Press down on the control key to switch
to the time input field.
§Time§
on the dis-
Date/Time
Date:
14.10.2010
Time:
00:00
Back Save