Setting The Date/Time - Gigaset A510a User Manual

First steps

Setting the date/time

Set the date and time so that the correct date and time can be assigned to incoming
calls, and so that the alarm clock can be used.
Please note
Depending on your network provider, the date and time may be displayed auto-
matically.
Redial
Enter Date:
[04.04.2011]
Back
Enter Time:
[07:15]
Back
16
¤ Press the key below
Time
screen to open the input field.
(If you have already set the date/time,
open the input field via the menu
¢ page 26.)
The Date/Time submenu is shown on the
display.
¤ The active input position flashes.
Enter the day, month and year as an
8-digit number via the keypad,
e.g., Q4Q42Q11
for 4 April 2011.
To change the input position,
e.g., to correct an entry, press
right or left on the control key.
¤ Press the key below
OK
screen to save your entry.
¤ Enter the hours and minutes in 4-digit
format via the keypad, e.g., QM15
for 07:15 am.
Change the input position with the
control key if necessary.
OK
¤ Confirm with
§Time§
on the display
§OK§
on the display
§OK§
.