Constant Headlamp Mode - Mercedes-Benz Vito Operating Instructions Manual

Press æ or ç to select the lan-
E
guage for on-board computer mes-
sages shown in the display.
The languages available are:
I German
I English
I French
I Italian
I Spanish
Selecting the display for the status line
Use the buttons on the steering wheel.
Press the è or · button repeat-
E
edly until the SETTINGS menu appears
in the display.
Press j to go to the submenu se-
E
lection.
Press æ or ç to select the
E
STRUMENT CLUSTER submenu.
On-board computer with steering wheel buttons - version A
Press j to select the
E
DISPLAY function.
The current setting is highlighted.
Press æ or ç to select whether
E
the outside temperature or the speed
is displayed.
The selected information is then shown
continuously in the bottom left part of
the display ( e page 124).
Lighting submenu
Setting constant headlamp mode
If you have set constant headlamp mode
and the light switch is in the M posi-
tion, the parking lamp, low beam head-
lamps, tail lamp and licence plate lamp
light up automatically when the engine is
running.
IN-
Nur fuer internen Gebrauch
STATUS LINE For countries where constant headlamp
mode is mandatory,
fault setting.
Use the buttons on the steering wheel.
Press the è or · button repeat-
E
edly until the
in the display.
Press j to go to the submenu se-
E
lection.
Press æ or ç to select the
E
LIGHTING
Press j to select the
E
HEADLAMP MODE
The current setting is highlighted.
Press æ or ç to select
E
Constant
i
If you turn the light switch to C or
B, the corresponding light switches on.
Constant headlamp mode remains activated if
the light switch is turned to U.
Controls
Constant is the de-
SETTINGS menu appears
submenu.
LIGHT CIRCUIT
function.
Manual or

(constant headlamp mode).

113
3