Playback Modes; Continuous Playback; Single-Track Playback; Program Playback - Tascam Professional CD-RW900 Owner's Manual

4−Playback operations

Playback modes

There are four different playback modes. The select-
ed mode will be indicated on the left of the display.
≠ Continuous playback mode (default setting): no
indication lamp
≠ Single playback mode:
≠ Program playback mode:
≠ Random playback mode:
The playback mode can be selected using the
key on the remote control unit. Pressing the
MODE
key changes the playback mode on the display in the
following order:
Continue ® Single ® Program ® Random
You can also select the playback mode using the
PLAY MODE option in the PLAY sub-menu (re-

Continuous playback

Programing is cancelled, and playback continues in
the normal order.
1. When stopped, set the mode to display
or
.
Mode>Cont

Single-track playback

This function enables playback of just a single track.
1. When stopped, set the mode to display
.
Mode>Single
2. Use the keys or the number keys (0~9)
SKIP
on the remote control to select the desired

Program playback

This function enables playback of selected tracks in
any desired order. Up to 99 tracks can be selected for
pro-gram playback.
1. When stopped, set the mode to display
.
Mode>Program
2. Use the number keys (0~9) on the remote control
unit to select each desired track for program play-
back, then press the
ENTER
You can also rotate the
the track number and push to enter.
The track number will be entered into the pro-
gram.
Repeat the above step 2 until the desired program
is completed. As the program is being created, the
program number and total program playing time is
revised on the display.
NOTE
If the key is pressed, the programmed track
CLEAR
1
TASCAM CD-RW900
lamp is lit
SINGLE
red lamp is lit
PROGRAM
red lamp is lit
RANDOM
PLAY
Continue
Single
Program
key.
dial to select
MULTI JOG
fer to "Operation basics" on page 15). Turning the
dial clockwise changes the playback
MULTI JOG
mode shown on the display in the following order:
Mode>Cont ® Mode>Single ® Mode>Program ®
Mode>Random
Pressing the
MENU
dial returns to normal mode from the menu mode.
While the mode can be changed from any playback
mode, the explanation in this manual will assume the
user is starting from the Continuous mode.
NOTE
The selected playback mode remains after power is
turned off. However, the program playback mode will
be cleared to "Continuous" mode when the power is
turned off.
2. Press the
PLAY
the track number.
track. The
MULTI JOG
select the track also.
or
3. Press the
PLAY
After the selected track finishes, playback stops.
will be deleted from the last.
3. When program setting is completed, press the
key to begin playback of the tracks in the
PLAY
or programmed order.
NOTE
≠ If the key is pressed without first pressing
STOP
the key, all the program data will be erased.
PLAY
≠ When stoppped, if the playback mode is switched
to another, all the program data will be erased.
≠ The programmed play order is not memorized
when power is turned off.
≠ In this mode, if there are no tracks programed, the
CD-RW900 will not start playback.
≠ If an attempt is made to enter more than 100 pro-
gram steps, the message PGM Full! appears on
the display.
≠ If the total program playing time exceeds 999 min
59 sec, --- : -- appears on the display.
key or pushing the
MULTI JOG
key to begin playback in order of
dial can be used to
key to begin playback.