Audio dubbing
You can record an audio sound to add to the original sound on a tape by connecting
audio equipment or a microphone. If you connect the audio equipment, you can add
sound to your recorded tape by specifying starting and ending points. The original
sound will not be erased.
Select one of the following connections to add an audio sound.
Connecting the microphone with the MIC jack
You can check the recorded picture and sound by connecting the A/V jack to a TV.
The recorded sound is not output from a speaker. Check the sound by using the
headphones or TV.
Connecting the A/V connecting cable to the A/V jack
AUDIO L
Do not connect the
video (yellow) plug.
94
: Signal flow
Audio equipment
LINE OUT
L
R
AUDIO R
: Signal flow
MIC
(PLUG IN
POWER)
Microphone (optional)
A/V