Sony Handycam DCR-PC9 Operating Instructions Manual page 116

Using a "Memory Stick" – introduction
To return to FN
Press EXIT.
To execute settings
Press EXEC or
To cancel settings
Press
Notes
•When using the touch panel, press operation buttons with your thumb supporting the
LCD screen from the back side of it or press those buttons lightly with your index
finger. Do not press them with sharp objects such as pens.
•Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You
can control the display with DISPLAY/TOUCH PANEL on your camcorder.
•When operation buttons do not work even if you press them, an adjustment is
required (CALIBRATION) (p. 177).
When executing each item
The green bar appears above the item.
If the items are not available
The color of the items changes to grey.
Touch panel
You can operate with the touch panel using the viewfinder (p. 63).
Press FN to display the following buttons:
In the memory camera mode
PAGE1
PAGE2
PAGE3
In the memory playback mode
PAGE1
PAGE2
PAGE3
116
OK.
OFF to return to PAGE1/PAGE2/PAGE3.
MENU, PLAY, INDEX, SPOT METER, EXPOSURE
LCD BRT, PLAY, INDEX, MEM MIX
SELFTIMER, PLAY, INDEX, VOL
MENU, CAM, INDEX, DELETE,
LCD BRT, CAM, INDEX, PB ZOOM,
DATA CODE, CAM, INDEX,
,
+ –
, –
+
, –
+