Sony Handycam DCR-PC9 Operating Instructions Manual page 81

Dubbing only desired scenes – Digital program editing
(3) Locate the infrared rays emitter of your camcorder and
face it towards the remote sensor of the VCR
Set the devices about 30 cm (11 7/8 in.) apart, and remove any obstacles between the
devices.
(4) Confirming the VCR operation
1 Insert a recordable tape into the VCR, then set the VCR to recording pause.
2 Select IR TEST, then press EXEC.
3 Select EXECUTE, then press EXEC.
If the VCR starts recording, the setting is correct.
The indicator you selected to cancel recording pause on the VCR flashes on the
LCD screen. When finished, the indicator changes to COMPLETE.
2,3
OTHERS
ED I T SET
CONTROL
ADJ TEST
"CUT - I N"
"CUT -OUT"
I R SETUP
PAUSEMODE
I R TEST
EXEC
When the VCR does not operate correctly
•After checking the code in "About the IR SETUP" code, set the IR SETUP or the
PAUSEMODE again.
•Place your camcorder at least 30 cm (11 7/8 in.) away from the VCR.
•Refer to the operating instructions of your VCR.
Infrared rays emitter
Remote sensor
A/V connecting cable
EXIT
OTHERS
ED I T SET
CONTROL
ADJ TEST
ENGAGE "CUT - I N"
REC PAUSE
"CUT -OUT"
I R SETUP
RETURN PAUSEMODE
EXECUTE I R TEST
RET.
VCR
EXIT
COMPLETE
EXEC RET.
81