Using The Viewfinder - Sony Handycam DCR-PC9 Operating Instructions Manual

Using the viewfinder

You can pull out the viewfinder until it clicks, and then turn the LCD panel over and
move it back to your camcorder body with the LCD screen facing out. You can operate
with the touch panel using the viewfinder.
Use the viewfinder in the following case:
When operating camera brightness and the fader (only in CAMERA mode) on the
touchpanel using the viewfinder
(1) In CAMERA or MEMORY mode, pull out the viewfinder until it clicks, and
then turn the LCD panel over and move it back to your camcorder body with
the LCD screen facing out.
(2) Press
(3) Press OK. The LCD screen is turned off.
(4) Press the LCD screen. EXPOSURE,
CAMERA mode) appear.
(5) Select the desired item, then press
EXPOSURE: adjust the exposure by pressing –/+.
FADER:
ON:
4
In CAMERA mode
In MEMORY mode
To make the buttons on the LCD screen disappear
Press OK.
OFF. The message PANEL OFF appears on the screen.
press FADER until the desired fader mode is displayed (p. 45).
The indicator changes as follows:
FADER t M. FADER t BOUNCE t MONOTONE t
OVERLAP t WIPE t DOT t (no indicator)
The LCD screen lights up.
EXPO– OK
SURE
ON FADER
EXPO– OK
SURE
ON
OK, ON and FADER (only in
OK.
63