Sony Handycam DCR-PC9 Operating Instructions Manual page 56

Adjusting the white balance manually
In the automatic white balance mode
Point your camcorder at the white subject for about 10 seconds after setting the POWER
switch to CAMERA to get better adjustment when:
– You detach the battery for replacement.
– You bring your comcorder from the interior of a house holding the exposure, or vice
versa.
In the hold white balance mode
Set the white balance to AUTO and reset to HOLD after few seconds when:
– You change the PROGRAM AE mode.
– You bring your comcorder from the interior of a house, or vice versa.
56