Sony Handycam DCR-PC9 Operating Instructions Manual page 141

Copying still images from a tape – Photo save
When the access lamp is lit or flashing
Do not shake or strike your camcorder. As well do not turn the power off, eject a
"Memory Stick" or remove the battery pack. Otherwise, the image data breakdown may
occur.
If the write-protect tab on the "Memory Stick" is set to LOCK
"NOT READY" appears when you select the item in the menu settings.
When you change "Memory Stick"s in the middle of copying
Your camcorder resumes copying from the last image recorded on the previous
"Memory Stick".
141