Superimposing a still image in a "Memory Stick" on a moving
picture – MEMORY MIX
Recording a superimposed image to "Memory Stick" as a still
image
Before operation
Insert a recorded "Memory Stick" into your camcorder.
(1) Set the POWER switch to MEMORY.
(2) In the standby mode, press FN and select PAGE2.
(3) Press MEM MIX. The last recorded or last composed image appears on the
(4) Press –/+ on the right lower corner of the screen to select the still image which
(5) Press a desired mode. The still image is superimposed on the moving picture.
(6) Press –/+ on the left lower corner of the screen to adjust the effect, then press
(7) Press EXIT to return to FN.
(8) Press PHOTO deeply. Recording is completed when the bar scroll indicator
2
FN
138
Make sure that the LOCK switch is set to the right (unlock) position.
lower part of the screen as a thumbnail image.
you want to superimpose.
– : to see the previous image
+: to see the next image
OK to return to PAGE2.
disappears. The image displayed on the screen will be recorded on a "Memory
Stick".
1
3
MEM MIX
MEM
CAMCM
M I X
CHROM
4,5
MEM MIX
–
+
M. LUMI
–
6
MEM MIX
–
+
M. LUMI
–
POWER
LOCK
OFF
MCCAM
OK
LUMI
MCCAM
Still image
CHROM
100–0001
–
+
OFF
OK
100–0001
+
–
+
OFF
OK
100–0001
+
–
+