Step 2 Setting The Date And Time - Sony Handycam DCR-PC9 Operating Instructions Manual

Step 2 Setting the date and time

Set the date and time settings when you use your camcorder for the first time. "CLOCK
SET" will be displayed each time that you set the POWER switch to CAMERA or
MEMORY unless you set the date and time settings.
If you do not use your camcorder for about three months, the date and time settings
may be released (bars may appear) because the built-in rechargeable battery installed in
your camcorder will have been discharged (p. 177).
First, set the year, then the month, the day, the hour and then the minute.
(1) Set the POWER switch to CAMERA or MEMORY.
(2) Press FN to display PAGE1 (p. 20).
(3) Press MENU to display the menu.
(4) Select
(5) Select CLOCK SET with r/R, and press EXEC.
(6) Adjust the desired year with r/R, and press EXEC.
(7) Set the month, day and hour with the same procedure as step 6.
(8) Set the minute with r/R, and press EXEC by the time signal. The clock starts to
move.
2
FN
6
R
EXEC
r
EXIT
2001 JAN 1 2001 JAN 1
1 2 00 AM
1 2 00 AM
with r/R, and press EXEC.
4
R
r
SETUP MENU
CLOCK SET
DEMO MODE
r R EXEC
8
SETUP MENU
CLOCK SET
DEMO MODE
EXIT
r R
EXEC
EXIT EXIT
SETUP MENU
CLOCK SET – – : – – : – –
DEMO MODE
RET. r R EXEC RET.
R
r
EXIT
SETUP MENU
CLOCK SET
DEMO MODE
2001 JUL 4
5 30 PM
EXEC RET. r
5
EXEC
EXIT
SETUP MENU
CLOCK SET
DEMO MODE
2001 JAN
12 00 AM
r R
EXEC RET.
EXEC
EXIT
JUL 4 2001
5 : 3 0 : 0 0 PM
R EXEC RET.
1
17