Sony Handycam DCR-PC9 Operating Instructions Manual page 76

Dubbing a tape
Using the i.LINK cable (DV connecting cable)
Simply connect the i.LINK cable (DV connecting cable) (optional) to DV of your
camcorder and to DV IN of the DV products. With digital-to-digital connection, video
and audio signals are transmitted in digital form for high-quality editing. You cannot
dub the titles, display indicators or the contents of cassette memory or letters on the
"Memory Stick" index screen.
Set the input selector on the VCR to the DV input position if the VCR is equipped with
the input selector.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
(2)Prepare the VCR for recording.
(3) Set the POWER switch to VCR.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
: Signal flow
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
You can connect one VCR only using the i.LINK cable (DV connecting cable)
See page 172 for more information about i.LINK.
The following functions do not work during digital editing:
– Picture effect
– Digital effect
– PB ZOOM
If you record playback pause picture with the DV jack
The recorded picture becomes rough. And when you play back the picture using the
other video equipment, the picture may jitter.
76
the recorded tape into your camcorder.
Set the input selector to LINE. Refer to the operating instructions of the VCR.
DV
(optional)
DV
DV IN