Checking The Recording - End Search / Editsearch / Rec Review - Sony Handycam DCR-PC9 Operating Instructions Manual

Checking the recording
– END SEARCH / EDITSEARCH / Rec Review
You can use these buttons to check the recorded picture or shoot so that the transition
between the last recorded scene and the next scene you record is smooth.
END SEARCH
You can go to the end of the recorded section after you record.
(1) In the standby mode, press FN to display PAGE1 (p. 20).
(2) Press END SCH.
To return to FN
Press EXIT.
To stop searching
Press END SCH again.
EDITSEARCH
You can search for the next recording start point.
(1) In the standby mode, press FN to display PAGE1.
(2) Press MENU, then set EDITSEARCH to ON in
Hold down the 7/– · + side of EDIT. The recorded section is played back.
+ :
7/– : to go backward
Release 7/– · + to stop playback. If you press START/STOP, re-recording begins from
the point you released 7/– · +. You cannot monitor the sound.
32
1
FN
EDIT
The last 5 seconds of the recorded section are played back and your camcorder
returns to the standby mode. You can monitor the sound from the speaker or
headphones.
to go forward
in the menu settings.