Sony Handycam DCR-PC9 Operating Instructions Manual page 46

Using the fader function
(1) When fading in [a]
(2) Press FADER. The screen to select the fader mode appears.
(3) Select a desired fader mode.
(4) Press
(5) Press START/STOP. After the fade in/out is carried out, your camcorder
1
2~4
To cancel the fader function
Before pressing START/STOP, press
return to FN.
Note
You cannot use the following functions while using the fader function. Also, you cannot
use the fader function while using the following functions.
– Digital effect
– Low lux mode of PROGRAM AE (Overlap, Wipe or Dot function only)*
– Super NightShot
– Tape Photo recording
– Interval recording
– Cut recording
* If you operate your camcorder while the fader function is in use, the Low lux mode
indicator flashes and you cannot use the fader function.
When you select OVERLAP, WIPE or DOT
Your camcorder automatically stores the image recorded on a tape. As the image is
being stored, the playback picture disappears. At this stage, the picture may not be
recorded clearly, depending on the tape condition.
46
In the standby mode, press FN to display PAGE1.
When fading out [b]
In the recording mode, press FN to display PAGE1.
OK to return to PAGE1, and press EXIT to return to FN.
The fader indicator you selected flashes.
automatically returns to the normal mode.
FN
FADER
FADER
NORM.
FADER
MONO–
OFF OK
MOSC. BOUN–
FADER
CE
OVER– W I PE DOT
TONE LAP
OFF to return to PAGE1, and press EXIT to