Checking The Recording - End Search / Editsearch / Rec Review - Sony DSR-PD150P Operating Instructions Manual

Checking the recording
- END SEARCH / EDITSEARCH / Rec Review
You can use these buttons to check recorded pictures or shoot so that the transition
between the last recorded scene and the next scene you record is smooth
You can easily go to the end of the last recorded portion
Press END SEARCH in standby mode
The camcorder rewinds or fast-forwards the tape and the last five-second recorded
picture is played back After playback the camcorder turns to standby mode You can
monitor the sound from the speaker or headphones
You can change the next recording start point in standby mode
Hold down the +/- side of EDITSEARCH in standby mode The recorded picture is
played back
+ to go forward
- to go backward
Release EDITSEARCH to stop playback If you press START/STOP, re recording begins
from the point you released EDITSEARCH You cannot monitor the sound
You can check the last recorded portion
Press the
The last few seconds of picture is played back and the camcorder returns to standby
You can monitor the sound from the speaker or headphones
End search function
When you use a tape without cassette memory the end search function does not work
once you eject the cassette after you have recorded on the tape If you use a tape with
cassette memory the end search function works even once you eject the cassette
If there is a blank portion at the beginning or between the recorded portions, the end
search function may not work correctly (p 142)
side of EDITSEARCH momentarily in standby mode
25