Making Dough; Making Brioche Dough - Panasonic SD-2501 Operating Instructions And Recipes

Automatic bread maker
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 3

Making Dough

1
Preparations
Place the kneading blade into the bread pan.
(P. 14)
Place the ingredients in the bread pan in the order listed in the recipe.
Set the bread pan into the main unit, and plug the machine into the socket.
1
Select dough menu
[The display shows when menu '16' (SD-2500: '15') is selected.]
2
Start the machine
Estimated time until the selected program is complete
 The start light will come on.
3
Press 'Stop' and remove dough
when machine beeps 8 times and the bar at 'End' flashes
 The flashing start light will go off.
18
Turn to P. 25 for
dough recipes
 To cancel/stop once
started
(hold for more than
1 second)
2
3
 Timer is not available on Dough menus
[except menu 22 (SD-2500: 20)].
 If you would like to add extra ingredients to your
dough, see P. 16.
 For menus other than 22, 26 and 27 (SD-2500:
20, 24 and 25), a 'Rest' process will begin
immediately after starting, followed by 'Knead'
and 'Rise'.
 Shape the finished dough and allow it to rise for
the second time according to the recipe, then
bake in the oven.

Making Brioche Dough

1
2, 3
Preparations
Cut the butter for adding later for 1–2 cm cubes and keep them in fridge.
(P. 14)
Set the kneading blade into the bread pan.
Place the ingredients in the bread pan in the order listed in the recipe.
Set the bread pan into the main unit, and plug the machine into the socket.
1
Select
menu '23'
(SD-2500: '21')
2
Start the machine
Time until adding the extra butter or ingredients
 The start light will come on.
3
Adding additional butter when the beep
sounds, then press 'Start' again
Complete placing the additional cubed butter while '
After the Start
pad is pressed
Display indicates remaining time until completion of the program
4
Press 'Stop' and remove dough
when machine beeps 8 times and the bar at 'End' flashes
 The flashing start light will go off.
Turn to P. 25 for
dough recipes
 To cancel/stop once
started
(hold for more than
1 second)
4
[Simple way to make brioche]
Add butter with other
ingredients at the beginning.
 Cut the butter into 2 cm cubes and place them
into the bread pan at the same time as the other
ingredients.
 Follow the steps shown on the left. However,
when the machine beeps on step 3 to add extra
butter, please leave as it is.
 Time required for completion is 1 hr 50 minutes.
* When butter is added at the beginning, flavour,
texture and rising of bread are a little different from
the time bread is baked with extra butter added in
later.
 A 'Rest' process will begin immediately after
starting, followed by 'Knead' and 'Rise'.
 When adding extra ingredients such as raisins,
add them with the butter. (Use max. 150 g for
ingredients)
 Even without pressing the Start pad, kneading
' is flashing.
will continue after 5 min. It does not continue
kneading immediately, even if the Start pad is
pressed after adding butter or ingredients.
 Do not add butter after display shows remaining
time. (P. 35)
 Shape the finished dough and allow it to rise for
the second time according to the recipe, then
bake in the oven.
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sd-2500

Table of Contents