Speaker Installation Option - Panasonic SC-BT205 Operating Instructions Manual

Turn on the wireless system.
1
Unit on/off button [C I, B Í]
Use this button to turn the unit on and off.
C I: The unit is on.B Í: The unit is off.
WIRELESS LINK
WIRELESS LINK indicator
Red: The unit is on and the wireless link is deactivated.
Turn off and on the wireless system.
Green: The unit is on and the wireless link is
activated.
Turn on the main unit.
2
The wireless link indicator on the main unit will be turned on.
e.g.
≥If the indicator is flashing, refer to the
"Optional wireless system
SLP STCT DDTS PL
SRDE. PRG
(SH-FX70)" in the Troubleshooting
PGM RND RDS
W1
EQ
W2 WS
guide. (
Start play on the main unit.
3
≥For optimal audio output, it is recommended to
re-configure the main unit using SMART SETUP.
( 14)
NOTE ≥You cannot use the wireless system with
SH-FX65T or SH-FX67T digital transmitter.
e
51).
Speaker installation
option
Attaching to a wall
You can attach all of the speakers (except subwoofer) to a
wall.
≥The wall or pillar on which the speakers are to be attached
should be capable of supporting 10 kg per screw. Consult a
qualified building contractor when attaching the speakers to a
wall. Improper attachment may result in damage to the wall
and speakers.
1Drive a screw (not included) into the wall.
At least 30 mm
4.0 mm
Wall or pillar
3 mm to 5 mm
2Fit the speaker securely onto the screw(s) with the hole(s).
[BT205]
Front and surround speaker
Attach to a wall without the base and the stand
72 mm
348.5 mm
[BT200]
Front and surround speaker
Reattaching the speaker cables
Insert the cable
from the bottom.
7.5 mm to 9.4 mm
In this position,
DO
the speaker will
NOT
likely fall if
moved to the
left or right.
Move the
speaker so that
DO
the screw is in
this position.
Centre speaker
190 mm
[BT205]
Leave about
120 mm
Pull out the cable
through the hole.
RQT9445
43