This unit can play PAL and NTSC, but the "TV System" (
must match the system of your TV.
Depending on the PAL video on the disc, the image may not be displayed
correctly on an NTSC TV.
Disc handling precautions
≥ Do not attach labels or stickers to discs. This may cause disc warping,
rendering it unusable.
≥ Do not write on the label side with a ball-point pen or other writing
≥ Do not use record cleaning sprays, benzine, thinner, liquids which
prevent static electricity, or any other solvent.
≥ Do not use scratch-proof protectors or covers.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed stickers or labels (rented
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
About MP3/JPEG/Xvid files
[MP3] (Extension: ".MP3", ".mp3")
≥ Sampling frequency and compression rate:
– 8 kHz, 11.02 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz (8 kbps to
160 kbps), 32 kHz, 44.1 kHz and 48 kHz (32 kbps to 320 kbps)
≥ ID3 tags: version 1, 2
[JPEG] (Extension: ".JPG", ".jpg", ".JPEG", ".jpeg")
≥ JPEG files taken on a digital camera that conform to DCF Standard
(Design rule for Camera File system) Version 1.0 are displayed.
– Files that have been altered, edited or saved with computer picture
editing software may not be displayed.
≥ This unit cannot display moving pictures, MOTION JPEG and other
such formats, still pictures other than JPEG (e.g. TIFF), or play
pictures with attached audio.
[Xvid] (Extension: ".XVID", ".xvid", ".AVI", ".avi")
≥ Xvid files greater than 2 GB or have no index may not be played
properly on this unit.
≥ This unit supports all resolutions up to maximum of 720k480
≥ There may be differences in the display order on the menu screen and
≥ This unit cannot play files recorded using packet write.
≥ Discs must conform to UDF bridge (UDF 1.02/ISO9660).
≥ This unit does not support multi-session. Only the default session is
≥ Discs must conform to ISO9660 level 1 or 2 (except for extended
≥ This unit supports multi-session but if there are many sessions it takes
more time for play to start. Keep the number of sessions to a minimum
to avoid this.
≥ This unit does not guarantee connection with all USB devices.
≥ This unit does not support USB device charging.
≥ FAT12, FAT16 and FAT32 file systems are supported.
≥ This unit supports USB 2.0 Full Speed.
Clean this unit with a soft, dry cloth
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, carefully read the instructions that
came with the cloth.
Do not use commercially available lens cleaners as they may cause
malfunction. Cleaning of the lens is generally not necessary although
this depends on the operating environment.
Before moving the unit, ensure the disc tray is empty. Failure to
do so will risk severely damaging the disc and the unit.
Speaker installation option
14) of this unit
Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers, and personal injury.
1 Drive a screw (not supplied) into the wall.
Wall or pillar
2 Fit the speaker securely onto the screw(s) with the hole(s).
≥ In this position, the speaker will
likely fall if moved to the left or
Use the measurements indicated below to identify the screwing positions
on the wall.
≥ Leave at least 20 mm of space above the speaker and 10 mm on each
side to allow enough space for fitting the speaker.
A 18 mm
B 99 mm
C 40 mm
D 40 mm
∫ To prevent speakers from falling
Front speaker, Surround speaker, Center speaker
e.g. Front speaker
At least 30 mm
7.0 mm to
5.5 mm to 7.5 mm
e.g., Surround speaker
≥ Move the speaker so that the
screw is in this position.
E 17 mm
F 64 mm
G 24 mm
H 96 mm
I 27 mm
String (not supplied)