Panasonic SC-BT205 Operating Instructions Manual page 38

Changing the unit's settings
To select these settings, perform steps 1 – 5 (
"Sound"
Dynamic Range Compression
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
Change the dynamic range (
Digital Audio Output
≥Press [OK] to show the following settings.
Dolby D/Dolby D +/
Dolby TrueHD
DTS/DTS-HD
MPEG Audio
BD-Video Secondary Audio
Turn on/off the clicking sound on the menu and audio with
secondary video in picture-in-picture mode. (
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz or more.
≥Signals are converted to 48 kHz despite the settings
across in the following cases:
– when the signals have a sampling frequency of over 192 kHz
–when the disc has copy protection
–when "BD-Video Secondary Audio" is set to "On"
Downmix
Switch the downmix system for playing back multi-channel surround sound.
≥When "Dolby D/Dolby D +/Dolby TrueHD" or "DTS/
DTS-HD" is set to "Bitstream", there are no downmix
effects for the outputted audio.
≥The audio will be outputted in "Stereo" in the following cases.
–AVCHD playback
–Playback of clicking sound on the menu and audio with
secondary video in picture-in-picture mode
High Clarity Sound
When the analogue video terminal is not being used, the
electrical current that flows through the analogue video
circuit can be stopped. This prevents adverse effects on the
audio signals and produces clearer sound.
≥This works only when "BD/DVD", "SD" or "USB"is selected as the source.
≥Set to "Enable" and then set "High Clarity Sound" on the
on-screen menu to "On". (
≥Use this when outputting image via HDMI AV OUT terminal.
Analogue image will not be output via COMPONENT
VIDEO OUT terminal or VIDEO OUT terminal.
Speaker
"Display"
On-Screen Messages
Choose whether to show status messages automatically.
On-Screen Language
Choose the language for these menus and on-screen messages.
Screen Saver Function
This is to prevent burn-in on the screen.
≥When this is set to "On", the masked-off area on the
screen becomes grey.
[Only when connecting with an HDMI cable or a
component video cable and "HDMI Video Format" (
is set to any other mode than "576p/480p", or "Component
Resolution" ( 39) is set to "720p" or "1080i"]
FL Display
Changes the brightness of the unit's display.
– The brightness of the volume indicator ( 6) is also changed.
Software Licence
RQT9445
38
37)
[BD-V] [AVCHD] [DVD-V] [DivX]
55) for late night viewing.
Select whether Dolby Digital,
Dolby Digital Plus, Dolby TrueHD,
DTS Digital Surround, DTS-HD
High Resolution Audio or
DTS-HD Master Audio is output in
"Bitstream" or "PCM" format.
≥Not making the proper settings
may result in noise.
≥If the unit is connected with the
HDMI AV OUT terminal, the
specifications of the connected
equipment take preference over this
unit and audio selected in these
items may not be output (e.g., when
a television is connected, the HDMI
audio output of this unit is limited to
down-mixed 2ch.)
[BD-V]
21)
36)
≥On ≥Off
≥Auto: Effective only when Dolby TrueHD is played.
≥Bitstream:
Select "Bitstream" when the connected equipment can decode
the respective audio format.
–Connect equipment supporting HDMI (High Bit rate Audio) and
use a High Speed HDMI Cable in order to output high bit rate
audio such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High
Resolution Audio or DTS-HD Master Audio.
≥PCM:
Select "PCM" when the connected equipment cannot decode the
respective audio format.
Refer to the operating instructions for connected devices to verify
whether or not they can decode each of the audio formats.
≥Bitstream: When connected to equipment with a built-in
MPEG decoder.
When connected to equipment without a built-in
≥PCM:
MPEG decoder.
The primary audio and secondary audio are mixed and
≥On:
output. The sampling frequency is converted to 48 kHz.
The clicking sound on the menu and secondary audio are not output.
≥Off:
≥On: Signals are converted to 48 kHz. (Choose when the
connected equipment cannot process signals with
sampling frequency of 96 kHz.)
≥Off: Signals are output as 96 kHz. (Choose when the
connected equipment can process signals with sampling
frequency of 96 kHz.)
≥Stereo: When connected to equipment that does not
support the virtual surround function.
≥Surround encoded: When connected to equipment that supports the
conversion from 2 channels to multi channel
surround.
≥Enable ≥Disable
Refer to page 41
≥Automatic ≥Off
≥English ≥Français
≥Deutsch ≥Italiano
≥On:
If there is no operation for 5 minutes or more, the displayed screen
switches to the other states automatically.
–When the Direct Navigator or START menu is displayed, the
display returns to the screen saver mode.
–When CD or MP3 is played, the display returns to the screen
39)
saver mode. (Playback continues.)
–When still pictures are shown (except for slideshow), the display
returns to the Direct Navigator screen.
≥Off
≥Bright
≥Dim: The display is dimmed.
The display is dimmed, but brightens when you
≥Automatic:
perform some operations.
Information about the software used by this unit is displayed.
≥Español
≥Nederlands ≥РУССКИЙ