Table of Contents
Advertisement
Speaker installation option
Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers, and personal injury.
1 Drive a screw (not supplied) into the wall.
‰
4.0 mm
Wall or pillar
2 Fit the speaker securely onto the screw(s) with the hole(s).
DO NOT
≥ In this position, the speaker will
likely fall if moved to the left or
right.
∫ Tips
Use the measurements indicated below to identify the screwing positions
on the wall.
≥ Leave at least 20 mm of space above the speaker and 10 mm on each
side to allow enough space for fitting the speaker.
[XH300]
Front speaker
A 25 mm
B 198 mm
C 45 mm
D 45 mm
Center speaker
I 18 mm
J 66 mm
K 25 mm
L 101 mm
M 28 mm
20
At least 30 mm
‰
‰
7.0 mm to
9.4 mm
5.5 mm to 7.5 mm
e.g., Center speaker
DO
≥ Move the speaker so that the
screw is in this position.
[XH300]
Surround speaker
E 41 mm
F 102 mm
G 40 mm
H 40 mm
[XH380] [XH370] Front/Surround speaker
Attach to a wall without the base and the stand.
∫ To prevent speakers from falling
Front speaker, Surround speaker, Center speaker
≥ You will need to obtain the appropriate screw eyes to match the walls or
pillars to which they are going to be fastened.
≥ Use a string of less than ‰2.0 mm, which is capable of supporting over
10 kg.
e.g. [XH380] [XH370] Front speaker
String (not supplied)
Approx. 120 mm
[XH380] [XH370] Reattaching the speaker cable
Insert the cable
from the bottom.
N 22 mm
O 330 mm
P 172 mm
Q 45 mm
R 45 mm
Screw eye
(not supplied)
Wall
Leave about
180 mm.
Pull out the cable
through the hole.
Hide quick links:
Advertisement
Table of Contents
