Panasonic SC-BT205 Operating Instructions Manual page 34

Network settings
Setting the connection speed
When the connection test results displays "Fail" after the IP
and DNS-IP addresses are assigned, perform the following
settings.
After performing steps 1–4 (
5 Press [3, 4] to select "Connection Speed
Auto-Config" and press [2, 1] to select "Off".
6 Press [3, 4] to select "Connection Speed
Setting" and press [2, 1] to select a
connection speed.
≥Select a connection speed in accordance with the
environment of the network connected.
≥When the settings are changed, the network connection
may be disabled depending on the device.
Testing of "Proxy Server Settings"
Always test the connection when new "Proxy Server
Settings" have been made.
While stopped
1
Press [BD/SD] to select "BD/DVD".
2 Press [SETUP].
3 Press [3, 4] to select "Network Settings" and
press [OK].
4 Press [3, 4] to select "Proxy Server Settings"
and press [OK].
5 Press [3, 4] to select "Connection Test" and
press [OK].
Proxy Server Settings
Initialize
Proxy Address
Proxy Port Number
Connection Test
OK
RETURN
"Testing...":The test is in progress.
"Pass": The connection is completed.
Press [RETURN] to exit.
"Fail": Please check the connection and settings.
RQT9445
34
33)
0
----
Setting the proxy server
In most cases, default settings can normally be used
without making any changes.
Please use this setting when instructed to by your
Internet service provider.
After performing steps 1–4 (
5 Press [3, 4] to select "Proxy Address" and
press [OK].
≥The text entry screen is displayed.
Text field: shows the text you have entered
Proxy Address
_
1 1 2 3 4 5 6 7 8 9 0
2 a b c
A B C
3 d e f
D E F
g h i
4 G H I
Delete 5 J K L j k l < > @
6 m n o [
M N O
Finish
p q r s
7 P Q R S
8 T U V t u v
9 w x y z
W X Y Z
0 " ' :
. , ? !
Space
OK
0 -- 9
RETURN
6 Press [3, 4, 2, 1] to select a character and
press [OK].
Repeat this step to enter other characters.
≥Press [;PAUSE] to delete.
7 Press [∫STOP] when you complete the entry.
8 Press [3, 4] to select "Proxy Port Number"
and press [OK].
9 Enter numbers with the numbered buttons and
press [OK].
Proxy Port Number
Input HTTP Proxy server port number and
press [OK]. The
deleted with [CANCEL]. The number will be
set to "0" if all characters are deleted and
[OK] is pressed.
0
0 - 9 Num ber
: Press [2, 1] to select "Yes" and press [OK].
≥The specified ports may be blocked and not be
able to be used depending on the network
environment.
TIPS
In order to restore the default settings
After performing steps 1–4 (
1) Press [3, 4] to select "Initialize" and press [OK].
2) Press [2, 1] to select "Yes" and press [OK].
Using the numbered buttons to enter characters
e.g., entering the letter "F"
3
def
1) Press [3] to move to the 3rd row.
2) Press [3] twice to highlight "F".
3) Press [OK].
left)
+ - *
= %
/
# $ &
] _
( )
~
{ }
\ I
; ` ^
left)
3 3
def def