MATSONIC MS8137C User Manual page 61

Video Off Option (Suspend --> Off)
This option defines if the video is powered down when the
system is put into suspend mode.
Video Off Method (DPMS Support)
This item defines how the video is powered down to save
power. This item is set to DPMS (Display Power Management
Software) by default.
MODEM Use IRQ (3)
If you want an incoming call on a modem to automatically re-
sume the system from a power-saving mode, use this item to
specify the interrupt request line (IRQ) that is used by the mo-
dem. You might have to connect the fax/modem to the
mainboard Wake On Modem connector for this feature to work.
Soft-Off by PWRBTN (Instant-Off)
Under ACPI (Advanced Configuration and Power manage-
ment Interface) you can create a software power down. In a
software power down, the system can be resumed by Wake
Up Alarms. This item lets you install a software power down
that is controlled by the power button on your system. If the
item is set to Instant-Off, then the power button causes a
software power down. If the item is set to Delay 4 Sec. then
you have to hold the power button down for four seconds to
cause a software power down.
55