MATSONIC MS8137C User Manual page 24

CPU fan and
heatsink assem bly
C PU fan con nector
C PU FA N 1
6. Lower the CPU fan/heatsink unit onto the CPU and
CPU socket and then snap the fan/heatsink into place.
7. Plug the CPU fan power cable into the CPU cooling
fan power supply on the mainboard (CPUFAN1).
Note: After you have assembled the system, you must set
the correct clock speed and frontside bus (FSB)
speed. Check the jumper section in Appendix A if
your mainboard has jumpers that control the FSB,
and refer to Frequency/Voltage Control on page 61
for more information.
Lo ckin g lever
Pin A -1 co rner
18