Answering System Settings - Panasonic KX-TG8200FX Operating Instructions Manual

TG8200_8220FX(e-e).book Page 38 Monday, August 6, 2007 5:25 PM
Answering System Features
I
Using the answering system
remotely
1
Dial your phone number from a
touch-tone phone.
2
After the greeting message starts,
enter your remote access code.
L The unit will announce the
number of new messages.
3
Enter remote commands.
Note:
L You can hang up at any time.
Remote commands
Key Operation
Repeat message
{1}
(during playback)
Skip message
{2}
(during playback)
Play new messages
{4}
Play all messages
{5}
Play greeting message
{6}
Record greeting message
{7}
Stop (recording, playback)
{9}
Turn answering system off
{0}
Erase currently playing
{*}{4}
message
Erase all messages
{*}{5}
Erase greeting message
{*}{6}
(during greeting message
playback)
End remote operation
{*}{#}
(or hang up)
*1 If pressed within the first 5
seconds of a message, the
previous message will be played.
38
Turning on the answering
system remotely
If the answering system is off, you can
turn it on remotely.
1
Dial your phone number from a
touch-tone phone.
2
Let the phone ring 9 times.
L A long beep will be heard.
3
Enter your remote access code
within 10 seconds after the long
beep.
L The greeting message is played
back.
L You can hang up, or enter your
remote access code again and
begin remote operation.
*1
Answering system
settings
If the base unit is reset to its default
settings (page 26), the following
answering system-related settings will
be reset.
Setting (default setting)
Answering system on/off
(Answer On)
Remote access code
(—)
Number of rings
(4 Rings)
Caller's recording time
(3 Minutes)
Call screening
(On)
Page
35
37
39
39
39