Intercom Between Handsets; Transferring Calls Between Handsets, Conference Calls - Panasonic KX-TG8200FX Operating Instructions Manual

TG8200_8220FX(e-e).book Page 42 Monday, August 6, 2007 5:25 PM
Multi-unit Operation
Important:
L Before registering the repeater to this
base unit, you must turn the repeater
mode on.
L Do not use more than one repeater at
a time.
Setting the repeater mode
1
" (centre of joystick) i | i
#
2
{^}/{V}: "Other Options" i
#
3
{^}/{V}: "Repeater Mode" i
#
4
{^}/{V}: "On" or "Off" i #
i {ih}
Note:
L After turning repeater mode on or off,
w will flash on the handset
momentarily. This is normal. The
handset can be used once w stops
flashing.
Intercom between
handsets
Intercom calls can be made between
handsets in the same radio cell.
Example: When handset 1 calls
handset 2
1
Handset 1:
{INT} i Press {2} (desired
handset number).
2
Handset 2:
{C}
3
When finished talking, press
{ih}.
42
Transferring calls
between handsets,
conference calls
Outside calls can be transferred
between 2 people in the same radio cell.
2 people in the same radio cell can have
a conference call with an outside party.
Example: When handset 1 transfers a
call to handset 2
1
Handset 1:
During an outside call, press {INT}.
i Press {2} (desired handset
number).
L The outside call will be put on
hold.
L If there is no answer, press {INT}
to return to the outside call.
2
Handset 2:
{C}
L Handset 2 can talk with handset
1.
3
Handset 1:
To complete the call transfer, press
{ih}.
To establish a conference call, press
{3}.
Transferring a call without speaking
to the other handset user
1
During an outside call, press {INT}.
i Press the desired handset
number.
L k flashes to indicate the outside
call is on hold.
2
{ih}
L The outside call rings at the other
handset.