Answering System Settings - Panasonic KX-TGD432 Operating Instructions Manual

Answering System
Using the answering system
remotely
1
Dial your phone number from a
touch-tone phone.
2
After the greeting message starts, enter
your remote access code.
3
Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 30).
4
When finished, hang up.
Voice guidance
n When the English voice guidance is
selected
During remote operation, the unit's voice
guidance starts and prompts you to press
1 to perform a specific operation, or press
2 to listen to more available operations.
n When the Spanish voice guidance is
selected
To start the voice guidance, press 9. The
voice guidance announces the available
remote commands (page 30).
Note:
R If you do not press any dial keys within 10
seconds after a voice guidance prompt, the
unit disconnects your call.
Remote commands
Key Operation
1 Repeat message (during playback)
2 Skip message (during playback)
4 Play new messages
5 Play all messages
9
Stop playback
Start voice guidance
0 Turn answering system off
*4 Erase currently playing message
*5 Erase all messages
*# End remote operation
(or hang up)
For assistance, please visit http://shop.panasonic.com/support
30
TGD51x_OI(en)_1129_ver031.pdf 30
*1
*2
Turning on the answering system
remotely
1
2
3

Answering system settings

Call screening
While a caller is leaving a message, you can
listen to the call through the unit's speaker.
1
2
Number of rings before the unit
answers a call
You can change the number of times the
phone rings "Ring count" before the unit
answers calls. You can select 2 to 7 rings, or
"Toll saver".
The default setting is "4 rings".
"Toll saver": The unit's answering system
answers at the end of the 2nd ring when new
messages have been recorded, or at the end
*1
of the 5th ring when there are no new
*2
messages.
1
2
For English voice guidance only
For Spanish voice guidance only
Dial your phone number from a
touch-tone phone.
Let the phone ring 15 times.
R A long beep is heard.
Enter your remote access code within 10
seconds after the long beep.
R The greeting message is played back.
R You can either hang up, or enter your
remote access code again and begin
remote operation (page 29).
MMENUN#310
MbN: Select the desired setting. a
MSAVEN a MOFFN
MMENUN#211
MbN: Select the desired setting. a
MSAVEN a MOFFN
2016/11/29 10:57:38