Table of Contents
Advertisement
TG8200_8220FX(e-e).book Page 12 Monday, August 6, 2007 5:25 PM
Preparation
*1
Base unit
Charger
*1 The pictured model is KX-TG8200.
*2 KX-TG8202
Note:
L It is normal for the handset to feel
warm during charging.
L If you want to use the unit
immediately, charge the batteries for
at least 15 minutes.
L Clean the charge contacts of the
handset, base unit, and charger with a
soft, dry cloth once a month. Clean
more often if the unit is subject to the
exposure of grease, dust, or high
humidity.
Battery level
Battery icon
Battery level
High
&
Medium
(
Low
)
L When flashing:
Needs to be
charged.
Panasonic Ni-MH battery
performance (supplied batteries)
Operation
Operating
time
In continuous use
12 hours max.
12
*2
Operation
In continuous
standby mode
Note:
L It is normal for batteries not to reach
full capacity at the initial charge.
Maximum battery performance is
reached after a few complete cycles of
charge/discharge (use).
L Actual battery performance depends
on a combination of how often the
handset is in use and how often it is
not in use (standby).
L Even after the handset is fully
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.
L The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit or charger
and let it charge for at least 7 hours.
Screen saver mode
The backlight will turn off completely
after 1 minute of inactivity if the
handset is not on the base unit or
charger. Press {ih} to turn the display
on again.
Turning the power
on/off
Power on
Press {ih} for about 1 second.
Operating
time
150 hours
max.
Hide quick links:
Advertisement
Table of Contents
