Connections - Panasonic KX-TG8200FX Operating Instructions Manual

TG8200_8220FX(e-e).book Page 10 Monday, August 6, 2007 5:25 PM
Preparation
*1 KX-TG8220

Connections

Connect the telephone line cord until it
clicks into the base unit and telephone
line jack (A). Connect the AC adaptor
cord (B) by pressing the plug firmly (C).
Base unit
C
C
A
B
USE ONLY the
supplied AC adaptor.
(220–240 V, 50 Hz)
To telephone line
USE ONLY the supplied cord.
Important:
L If you use a telephone line cord which
is not supplied, the unit may not work
properly.
10
Charger (KX-TG8202)
B
USE ONLY the supplied
AC adaptor (smaller).
Hooks
Note:
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
L The unit will not work during a power
failure. We recommend you connect a
standard telephone on the same line
for power protection.
Location
L For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances
such as TVs, radios, personal
computers, or other phones.
– in a convenient, high, and central
location.
C
C
Hooks
(220–240 V, 50 Hz)