Selecting A Base Unit; Cancelling A Base Unit; Deregistering A Handset - Panasonic KX-TG8200FX Operating Instructions Manual

TG8200_8220FX(e-e).book Page 41 Monday, August 6, 2007 5:25 PM
L If you forget your PIN, consult
your nearest Panasonic service
centre.
L When the handset has been
registered successfully, w will
stop flashing. If the key tone is
turned on (page 22), a
confirmation tone will be heard.

Selecting a base unit

When "Auto" is selected, the handset
will automatically use any available base
unit it is registered to. When a specific
base unit is selected, the handset will
make and receive calls using that base
unit only. If the handset is out of range of
that base unit, no calls can be made.
1
" (centre of joystick) i N i
#
2
{^}/{V}: "Select Base" i #
3
{^}/{V}: Select the desired base unit
number, or "Auto". i #
L The handset starts searching for
the base unit.

Deregistering a handset

A handset can cancel its own
registration (or the registration of
another handset) that is stored in the
base unit. This will allow the base unit to
"forget" the handset.
1
" (centre of joystick) i | i
#
2
Enter "335".
3
{^}/{V}: "Deregistration" i
#
L The numbers of all handsets
registered to the base unit are
displayed.
4
Select the handset(s) you want to
cancel, by pressing the desired
handset number. i #
Multi-unit Operation
L The selected handset number(s)
will flash.
L To cancel a selected handset
number, press the number again.
The number will stop flashing.
5
{^}/{V}: "Yes" i #
L A long beep will sound as each
handset number disappears.
L The handset does not beep when
cancelling its own registration.
6
{ih}

Cancelling a base unit

A handset can cancel a base unit that it
is registered to. This allows the handset
to "forget" the base unit.
1
" (centre of joystick) i N i
#
2
{^}/{V}: "Registration" i #
3
Enter "335".
4
{^}/{V}: "Cancel Base" i #
5
Select the base unit(s) you want to
cancel, by pressing the desired base
unit number. i #
L The selected base unit number(s)
will flash.
L To cancel a selected base unit
number, press the number again.
The number will stop flashing.
6
{^}/{V}: "Yes" i # i {ih}
Note:
L To register the handset to another
base unit or to the same base unit
again, see page 40.
Increasing the range of the
base unit
You can increase the signal range of the
base unit by using a DECT repeater.
Please use only the Panasonic DECT
repeater noted on page 4. Consult your
Panasonic dealer for details.
41