Table of Contents
Advertisement
TG8200_8220FX(e-e).book Page 31 Monday, August 6, 2007 5:25 PM
Using SMS
SMS allows you to send and receive text
messages between other fixed-line and
mobile phones that support compatible
SMS networks and features.
Important:
L To use SMS features, you must:
– subscribe to Caller ID and/or
appropriate service
– confirm SMS is turned on
– confirm the correct message centre
numbers are stored
Consult your service
provider/telephone company for
details and availability.
Note:
L A total of 47 messages (at 160
characters/message) can be saved.
Total number may be more than 47 if
length of messages is less than 160
characters/message.
L If the unit is connected to a PBX
system, you may not be able to use
SMS features.
Turning SMS on/off
1
" (centre of joystick) i X i
#
2
{^}/{V}: "Settings" i #
3
{^}/{V}: "SMS On/Off" i #
4
{^}/{V}: "On" or "Off" i # i
{ih}
SMS (Short Message Service)
X
Storing SMS message
centre numbers
SMS message centre telephone
numbers must be stored in order to send
and receive SMS messages. Consult
your service provider/telephone
company for more information.
L If you change the unit's region
setting/reset the base unit, the stored
message centre numbers will be
deleted (page 26). In this case, store
the numbers again.
1
" (centre of joystick) i X i
#
2
{^}/{V}: "Settings" i #
3
{^}/{V}: "Message Centre1" or
"Message Centre2" i #
4
Edit the number as necessary. i
#
5
{^}/{V}: "Save" i # i
{ih}
Note:
L For PBX users:
– You need to add the PBX line
access number and a dialling pause
to the beginning of the Message
Centre 1 phone number.
– If you only use the Message Centre
1 phone number for SMS, store the
Message Centre 1 phone number
as is (without adding a line access
number or dialling pause) to
Message Centre 2.
31
Hide quick links:
Advertisement
Table of Contents
