Answering System Settings - Panasonic KX-TGD58 M2 Series Operating Instructions Manual

Answering System for Landline
Using the answering system
remotely
1
Dial your landline phone number from a
touch-tone phone.
2
After the greeting message starts, enter
your remote access code.
3
Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 54).
4
When finished, hang up.
Voice guidance
n When the English voice guidance is
selected
During remote operation, the unit's voice
guidance starts and prompts you to press
1 to perform a specific operation, or press
2 to listen to more available operations.
n When the Spanish voice guidance is
selected
To start the voice guidance, press 9. The
voice guidance announces the available
remote commands (page 54).
Note:
R If you do not press any dial keys within 10
seconds after a voice guidance prompt, the
unit disconnects your call.
Remote commands
You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
Key Operation
1 Repeat message (during
*1
playback)
2 Skip message (during playback)
4 Play new messages
5 Play all messages
9
Stop playback
Start voice guidance
0 Turn answering system off
*4 Erase currently playing message
For assistance, please visit http://shop.panasonic.com/support
54
*2
*3
Key Operation
*5 Erase all messages
*# End remote operation
(or hang up)
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 For English voice guidance only
*3 For Spanish voice guidance only
Turning on the answering system
remotely
1
Dial your phone number from a
touch-tone phone.
2
Let the phone ring 15 times.
R A long beep is heard.
3
Enter your remote access code within 10
seconds after the long beep.
R The greeting message is played back.
R You can either hang up, or enter your
remote access code again and begin
remote operation (page 53).

Answering system settings

Call screening
While a caller is leaving a message, you can
listen to the call through the unit's speaker.
To adjust the speaker volume, press MDN or
MCN repeatedly.
You can answer the call by pressing M
the handset.
Call screening can be set for each unit. The
default setting is "On".
1
MMENUN#310
2
MbN: Select the desired setting. a
MSAVEN a MOFFN
Number of rings before the unit
answers a call
You can change the number of times the
phone rings "Ring count" before the unit
N on