Receiving A Message; Sms Settings - Panasonic KX-TG8200FX Operating Instructions Manual

TG8200_8220FX(e-e).book Page 33 Monday, August 6, 2007 5:25 PM
3
{^}/{V}: Select a message. i #
4
" i {^}/{V}: "Erase" or
"Erase All" i #
5
{^}/{V}: "Yes" i # i {ih}

Receiving a message

When an SMS message is received:
– "Receiving SMS Message" is
displayed
– a tone is heard (if the handset ringer is
turned on)
– h is displayed with the total number
of new (unread) SMS messages
Reading a received message
1
" (centre of joystick) i X i
#
2
{^}/{V}: "Receive List" i #
3
{^}/{V}: Select a message.
L Messages which have already
been read are indicated by a "Q",
even if they were read using
another handset.
L To erase a message, press W.
i {^}/{V}: "Yes" i #
4
Press # to read the message
content.
Note:
L To call the message sender, press
{C} or {s}.
Replying to a message
1
While reading a received message,
press ".
2
{^}/{V}: "Reply" i #
3
Enter a message (page 44). i
#
4
Edit the destination phone number
and/or press #.
SMS (Short Message Service)
X
5
Continue from step 5, "Writing and
sending a new message", page 32.
Editing/forwarding a message
1
While reading a received message,
press ".
2
{^}/{V}: "Edit Message" i #
3
Continue from step 3, "Writing and
sending a new message", page 32.
Erasing received messages
1
While reading a received message,
press ".
2
{^}/{V}: "Erase" or "Erase All"
i #
3
{^}/{V}: "Yes" i # i {ih}
Storing the sender's number
in the handset phonebook
1
While reading a received message,
press ".
2
{^}/{V}: "Add Phonebook" i
#
3
Continue from step 3, "Adding
entries", page 18.
Editing the sender's number
before calling back
1
While reading a received message,
press ".
2
{^}/{V}: "Edit and Call" i
#
3
Edit the number. i {C}

SMS settings

If the base unit is reset to its default
settings (page 26), the following SMS-
related settings will be reset. The
33