Table of Contents
Advertisement
Destination IP address: This is an Address-Filter used to allow or block traffic to particular IP
address(es). Enter the IP range that you want to filter. If only the first IP block is filled, it means
only that IP entered will be targeted. If you leave both IP blocks empty, it means any IP address.
Destination Subnet Mask: Type the subnet mask associated with the Destination IP address.
Destination Port (port to port:port): This is the Port Range that defines the port of the
application.
Interfaces: Check the check box to select the interface for this rule.
Click Apply/Save to set the new settings and you will be returned to the Incoming IP Filtering page.
Remove: To delete the IP filtering rule from the table, check Remove checkbox then click Remove
button to delete the selected item.
57
Hide quick links:
Advertisement
Table of Contents
