Table of Contents
Advertisement
ATM Interface (ADSL)
Click Add to go to ATM PVC Configuration screen.
VPI (0~255) / VCI (32~65535): Enter the VPI/VCI values provided by your ISP.
DSL Latency: Check Path0 or Path1 for DSL latency.
DSL Link Type: Select EoA (which is for PPPoE, IPoE and Bridge), PPPoA, or IPoA. Select the
one provided by your ISP.
Encapsulation Mode: Select the encapsulation mode. Different options will be provided for
different DSL link types. Select the one provided by your ISP.
Service Category: Describes the ATM Quality Of Service (QoS) being used on the VC.
Peak Cell Rate (cells/s): Specifies the upstream peak cell rate in cells per second.
37
Hide quick links:
Advertisement
Table of Contents
