DSL
This screen allows you to set DSL parameters. DSL knowledge is required to configure these
settings. Contact your ISP to make sure that these parameters are correct.
Modulation: There are 8 modes "G.Dmt", "G.lite", "T1.413", "ADSL2", "AnnexL", "ADSL2+",
"AnnexM", and "VDSL2" that user can select for this connection.
G.Dmt/G.lite Enabled: Tick the G.Dmt/G.lite check box if you want the system to use either
G.Dmt or G.lite mode.
T1.413 Enabled: Tick the T1.413 check box if you want the system to use only T1.413
mode.
ADSL2 Enabled: The device can support the functions of the ADSL2.
AnnexL Enabled: The device can support/enhance the long loop test.
ADSL2+ Enabled: The device can support the functions of the ADSL2+.
AnnexM Enabled: Covers a higher "upstream" data rate version, by making use of some of
the downstream channels.
VDSL2 Enabled: The device can support the functions of the VDSL2.
VDSL2 profile: There are 7 profiles "8a", "8b", "8c", "8d", "8a", "12a", "12b" and "17a" that user can
select for this connection.
US0: Check/uncheck this item to enable/disable this function.
Phone line pair: This is for reserved only. You can choose "Inner Pair" or "Outer Pair".
Capability: There are 2 options "Bitswap Enable" and "SRA Enable" that user can select for this
connection.
Bitswap Enable: Allows bitswaping function.
SRA Enable: Allows seamless rate adaptation.
Click Apply/Save to confirm the changes.
48