Selecting The "Reporting" Menu; Specifying The Setting For "Activity Report - Konica Minolta 7416MFG Advanced Information

Using the Utility Mode

Selecting the "REPORTING" menu

1
Press the [Utility] key ten times.
"REPORTING" appears.
2
From the 10-Key Pad, press the key
([1] through [4]) for the
"REPORTING" function that you
wish to set.
H The "REPORTING" functions
are as follows:
1 ACTIVITY REPORT
2 RESERV.REPORT
3 TX RESULT REPORT
4 RX RESULT REPORT
Tip
If, at any time, you wish to quit setting/changing a "REPORTING"
function, press the [No] key. When the message "STOP SETTING?"
appears, press the [Yes] key to quit.
To exit the "REPORTING" menu, press the [Auto Reset] key. The main
screen appears again.

Specifying the Setting for "ACTIVITY REPORT"

1
Select the "REPORTING".
H
Refer to "Selecting the "REPORTING" menu" on page 7-75.
2
Press the [1] key from the 10-Key
Pad to select "ACTIVITY REPORT".
3
Using the [ ] and [ ] keys, select
either "ON" or "OFF", and then
press the [Yes] key.
The "REPORTING" menu appears
again.
7416MFG
Ö
Ö
7
UTILITY
7-75