Reception Methods; Manual Reception; To Receive A Fax Manually; Memory Reception - Konica Minolta 7416MFG Advanced Information

6
6.2

Reception Methods

Manual Reception

This machine normally receives faxes automatically. However, if a
telephone is connected and the same line is used for phoning and faxing,
the document can simply be received after talking with the caller over the
phone.
Note
Manual reception is possible if a telephone is connected to the TEL
port of this machine.
To receive faxes manually, use the corresponding Utility mode
function to select the manual reception mode (p. 7-63).

To receive a fax manually

1
After the telephone rings, pick up the receiver to talk with the caller.
2
After talking and the caller's fax machine sounds long beeps, press the
[Start] key.
The machine starts receiving the fax.
Were the long beeps not sounded by the caller's fax machine?
?
§ If the caller's fax machine is set to send automatically, the long
beeps may not be sounded.
3
If the telephone receiver is replaced, the fax reception is finished and
the machine sounds a beep.

Memory Reception

This machine automatically prints faxes that it has received. However,
when receiving confidential faxes, the received document can be stored
in the memory and printed at a specified time or when memory reception
is turned off.
Memory reception is set using the corresponding Utility mode function.
For details on changing the setting, refer to "Specifying the Setting for
"MEMORY RX MODE"" on page 7-63.
6-20
Fax Transmission/Reception Methods
7416MFG