What Does Each Message Mean - Konica Minolta 7416MFG Advanced Information

When a Message Appears
8.9

What Does Each Message Mean?

Message
*REMOVE PAPER IN
BYPASS TRAY*
FRONT COVER OPEN
CLOSE FRONT COVER
DOCUMENT COVER OPEN
CLOSE DOCUMENT
COVER
DOC.FEED COVER OPEN
CLOSE DOC.FEED COVER
MEMORY FULL
PRESS ANY KEY
MACHINE TROUBLE
SERVICE CALL (C####)
FUSER COVER OPEN
CLOSE FUSER COVER
PAPER JAM
OPEN FRONT COVER
NO SUITABLE PAPER
LOAD PAPER (LT)
INCORRECT T/C TYPE
CHANGE T/C
7416MFG
Cause
Paper is loaded in the
Bypass Tray.
The Front Cover of the main
unit is open or not securely
closed.
The Auto Document Feeder
is lifted up (While a
document is loaded into it).
The Document Feeder
Cover is open.
The size of the data for the
scanned document has
exceeded the capacity of the
memory.
Some problem occurred in
the machine.
The Fuser Cover of the main
unit is open or not securely
closed.
A paper misfeed occurred.
All misfed paper was not
removed from the main unit.
The Fuser Cover of the main
unit is open or not securely
closed.
In Fax mode, plain paper of a
size other than Letter, Legal
or A4 is loaded into the paper
tray.
Incorrect type of toner
cartridge is installed.
Toner cartridge is not
installed.
Action
Remove the paper from the
Bypass Tray.
Securely close the Front
Cover.
Securely close the Auto
Document Feeder or remove
the document from the Auto
Document Feeder.
Securely close the
Document Feeder Cover.
Press the [Auto Reset] key,
or turn the machine off, then
on again. (The scanned data
should be cleared from the
memory.)
Turn the machine off, then
on again. If the error is still
displayed, contact your
service representative.
Securely close the Fuser
Cover.
Perform the misfeed-
cleaning procedure.
(p. 8-15)
Close the Fuser Cover, then
open and close the Front
Cover.
Load plain paper of the
appropriate size into Tray1
or the optional Tray2.
Install the correct type of
toner cartridge. (p. 8-4)
Install the toner cartridge.
(p. 8-6)
8-23
8