Table of Contents
Advertisement
Using the Utility Mode
To change/delete a programmed mailbox transmission
1
Select the "FAX REGISTRATION"
menu.
H
Refer to "Selecting the "FAX
REGISTRATION" menu" on
page 7-24.
2
Press the [4] key from the 10-Key
Pad to select "PROGRAM DIAL".
3
Press the one-touch dial key ([12]
through [15]) programmed with the
mailbox transmission that you wish
to change or delete.
4
Press the [No] key.
5
Using the [ ] and [ ] keys, select
either "EDIT" or "DELETE", and
then press the [Yes] key.
H
If "EDIT" was selected, the
specified recipient is displayed. (Continue with step 6.)
H
If "DELETE" was selected, the program dialing settings are deleted
and the "SELECT REGIST.KEY" screen appears again.
6
To change the recipient, press the
[No] key, and then by using the one-
touch dial keys or the speed dial
numbers, or by entering the fax
number using the 10-Key Pad,
specify a different recipient.
7
Press the [Yes] key.
The mailbox ID is displayed.
7416MFG
Ö
Ö
7
7-43
Advertisement
Table of Contents
