Table of Contents
Advertisement
5
No.
Name
5
PRINT DENSITY
6
LCD CONTRAST
7
LANGUAGE
8
LAMP OFF TIME
Selecting the "MACHINE SETTING" Menu
1
Press the [Utility] key.
"MACHINE SETTING" appears.
2
From the 10-Key Pad, press the key
([1] to [8]) for the MACHINE
SETTING function that you wish to
set.
H
The MACHINE SETTING
functions are as follows:
1 AUTO RESET
2 POWER SAVE MODE
3 DENSITY (ADF)
4 DENSITY (BOOK)
5 PRINT DENSITY
6 LCD CONTRAST
7 LANGUAGE
8 LAMP OFF TIME
Tip
To quit changing the machine settings, press the [No] key. "STOP
SETTING?" appears. Press the [Yes] key to quit changing the
settings.
5-2
Description
The copy/print density can be adjusted to one of six levels
between –3 and +2. With the normal print density at 0, choose
a smaller number for a lighter print or choose a higher number
for a darker print.
• The factory default setting is "0" (Normal).
The brightness of the display can be set to one of four levels
between –1 and +2.
• The factory default setting is "0" (Normal).
The display language can be selected.
• The factory default setting is "English".
The time until the exposure lamp goes off can be adjusted.
Mode 1: When four hours have passed since the last
operation was performed
Mode 2: When the machine enters Power Save mode
• The factory default setting is "Mode 1".
Using the Utility Mode
[A]
UTILITY
7416CG
Advertisement
Table of Contents
