INSTALLATION INSTRUCTIONS
1. Decide on the final location for the oven. Avoid drilling or
cutting into house wiring during installation.
Excessive
Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
2. To avoid floor damage, set the oven onto cardboard prior to
installation. Do not use handle or any portion of the front
frame for lifting.
3. Remove the shipping materials and tape from the oven.
4. Remove the hardware package from inside the bag
containing
literature.
5. Remove and set aside racks and other parts from inside the
oven.
6. Move oven and cardboard close to the oven's final location.
n D
IMPORTANT" Use both hands to remove oven doors.
1. Open oven door all the way.
2. Flip up the hinge latch on each side.
3. Close the oven door as far as it will shut.
4. Lift the oven door while holding both sides.
Continue to push the oven door closed and pull it away from
the oven door frame.
Electrical Shock Hazard
Disconnect power before servicing.
Use 12 gauge solid copper wire.
Electrically ground oven.
Failure to follow these instructions can result in death,
fire, or electrical shock.
This oven is manufactured
with red and black power supply wires
and a cabinet connected yellow/green wire twisted together. The
oven is not supplied with a white neutral wire.
1. Disconnect
power.
2. Remove terminal box cover screws.
_-
!jA
..............................
i
f
fij,_
IJ
A. Terminal box cover screws
B. Terminal box cover