Maytag MEW5524AS0 Installation Instructions Manual page 7

1. Remove the oven racks.
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
2. Using two or more people, lift the oven by the side handles
located on the right and left side of the oven. Gently insert
into the cabinet cutout.
4.
Securely fasten oven to cabinet using the two 4 x 25 mm self-
tapping screws provided. Insert the screws through holes in
mounting rails. Do not overtighten screws.
;i
5.
6.
A
A. Two 4 x 25 mm self-tapping screws
Install the oven racks.
Replace oven door by inserting both hanger arms into the
door.
3.
A
A. Side handle
Push against seal area of front frame to push oven into
cabinet.
7. Open the oven door. You should hear a "click" as the door is
set into place.
8. Move the hinge levers back to the locked position.
9. Check that the door is free to open and close. If it is not,
repeat the oven door removal process and installation
procedures. See "Remove Oven Door" section.
10. Reconnect power.
11. On some models, the display panel will light briefly, and
"--:--" should appear in the display.
12. If display panel does not light, please reference the
"Assistance or Service" section of the Use and Care Guide or
contact the dealer from whom you purchased your oven.