HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM User Manual page 198

Status bar The area located at the bottom of the ASM user interface that displays server
information and system alerts.
tape library An enclosure filled with magnetic tape cartridges, tape drives, and a robot(s).
The tapes are electronically labeled for identification and stored in library slots
when not in use. When data needs to be written or read from a tape, the robot
loads the tape cartridge into an available tape drive in the library.
Task Viewer
A window that displays completed tasks, scheduled tasks, and errors. To open
the Task Viewer, select Tools > Task Viewer.
toolbar
The area below the menu bar that contains icons for commonly-used commands.
The toolbar is the Microsoft Management Console toolbar; ASM is a snap-in
hosted by the Microsoft Management Console.
top-level share Top-level shared folder in a directory hierarchy.
unallocated space Unused storage that is not allocated. Unallocated space includes raw
(unconfigured) storage and unused configured storage (logical disks).
user-defined Any remote application that runs under Windows Server 2003 and uses NTFS
application volumes for storage.
virtual array Hard drives in an array can be divided into groups to create two or more virtual
arrays. ASM grows a virtual array (makes it bigger) when a hard drive(s) must
be added to the virtual array to obtain the required storage space. A virtual
array contains one or more LUNs.
virtual library Also known as a virtual tape library. A virtual library acts like a physical tape
library except that hard drive arrays are used for storage instead of magnetic
tapes.
volume
Resides on a logical disk. Volumes are assigned a drive letter on the file system
and contain file directories.
warning threshold See percent full warning threshold.
198 Glossary