Mail Store Tab: Exchange Storage Group Component Properties - HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM User Manual

Property
Protocol
Application Server Host Name
Application Server Volume -
Name
Application Server Volume -
Status
Application Server Volume -
Exclusive Storage
Application Server Volume - RAID
Level
Application Server Volume - RAID
Stripe Size
Application Server Volume - Read
Cache
Application Server Volume -
Write Cache
Application Server Volume -
Number of Hot Spares
Application Server Volume -
Mount Paths
• Warning Threshold tab—(Exchange storage group components) Allows you to change the Percent
Full Warning Threshold value for the storage group component. See
Setting a percent full warning threshold
• Mail Store, Public Store, or Log tab—(Exchange storage group components) One of these three
tabs is available depending on whether the storage group component is a mail store, public store,
or log.
• Mail Store tab—Displays the status and properties of the mail store reported byt the Exchange
server.
Table 24 Mail Store tab: Exchange storage group component properties
Value
Mail Store Name
Online
Database File
96 Monitoring storage
Value
Communication protocol used to transfer data between the server that
hosts Exchange (and the storage group component) and your HP
All-in-One Storage System.
Name of server that hosts Exchange and the storage group component.
Name of the volume on the server that hosts Exchange to which
Exchange saves the storage group component's data. The volume
resides on the iSCSI LUN exported by ASM to the server that hosts
Exchange.
Status of the volume on the server that hosts Exchange where the storage
group component is stored.
Indicates if storage group component's storage is configured with
exclusive storage. See Table 19
The RAID level to which the storage group component storage is
configured. See Customizing RAID levels
information.
The RAID stripe size to which the storage group component's storage
is configured. See Table 19
Speeds up reads when enabled. This setting is determined by the
storage array, not ASM.
Speeds up writes when enabled. This setting is determined by the
storage array, not ASM.
The number of hot spares with which the storage group component
storage is configured. See Table 19
Path the volume is mounted on, on the server that hosts Exchange. The
volume is built on the iSCSI LUN exported by ASM to the server that
hosts Exchange.
on page 74 for more information.
Description
Name of storage group mail store.
The storage group mail store is available for use.
Path to the file that stores all messages submitted through MAPI, as
well as the database tables that define mailboxes, messages, folders,
and attachments.
on page 72 for more information.
on page 73 for more
on page 72 for more information.
on page 72 for more information.