Table of Contents
Advertisement
When the oven is on standby - only the time of day appears on the display.
1- Select the type of dish you want to cook by turning the function selector knob to the
appropriate position.
... Pastry Fish
2- Turn the central button to the correct position for the chosen recipe.
Confirm your selection by pressing the same button.
3- According to the recipe selected, the following will be displayed:
• the heating elements in operation for the particular programme, as well
as the suggested shelf position for the food to be cooked.
... Place the food in the recommended position (eg. on the
2nd shelf).
• a pre-programmed (fixed setting - not variable)
... the temperature display is static.
• The weight of the food to be cooked or the number of servings/portions (variable
setting, flashing display), can be chosen by turning the central button. Select the
most appropriate setting and confirm by pressing the same button.
... the display indicating the weight of the food or the number of servings
becomes static.
The oven begins cooking in Automatic mode (the Auto sign starts flashing on the
display) and the oven starts to heat up.
4- Each recipe is recorded with a cooking time.
These settings can be adjusted by turning the programme selector knob to "cooking
time" or "end of cooking".
The "cooking time" or "end of cooking" display will start flashing. Using the central button,
modify the settings as required and then confirm them.
When you have finished, do not forget to turn the programme selector knob back to
STOP, to confirm a new programme.
For more details about programming, refer to the chapter entitled PROGRAMMING..
5- When the cooking time is up, the oven switches itself off automatically. An audible
signal sounds for 15 seconds to tell you the cycle has ended and the "cooking time"
and STOP symbols flash.
. Turn the function selector knob to STOP. If you do not do this the "cooking time" and
STOP symbols will continue flashing.
The cooling fan will continue operating for a while and will only stop when the oven
has cooled down sufficiently.
NB: please note that all AUTO cooking programmes are done without preheating. This means
that the food must be placed in the oven right at beginning of the programme.
AUTOMATIC MODE
Meat Rotisserie Legumes Desserts ...
The indicator light flashes until the selected temperature has been
reached. An audible signal sounds at the end of this operation.
The cooking time indicator light and the End of cooking time indicator
light appear on the display.
7
Advertisement
Table of Contents
