Table of Contents
Advertisement
ADVICE BEFORE USING THE OVEN FOR THE FIRST TIME
• PRELIMINARY CLEANING - clean the oven before using for the first time:
. wipe over external surfaces with a damp soft cloth.
. Wash all accessories and wipe inside the oven with a solution of hot water and washing up
liquid.
. Set the empty oven to the maximum temperature and leave on for about 1 hour, this will
remove any lingering smells of newness. Ensure that the room is well ventilated while this is
being done.
• THINGS TO REMEMBER
Confirmation of operation:
Stopping the oven:
the oven .... turn back the function selector knob to the Stop Position.
Child safety device:
Refer to the section entitled "Programming - The child safety device" page 13.
The cooling fan:
It begins and then stops automatically even when the oven is switched off.
Oven lighting:
By turning to the light symbol, you can switch on the oven light when it is not
in use.
When the oven is in use, with the exception of the pyrolytic cycle, the light stays on during
all of the oven functions and when the door is opened.
• CLOCK SETTING
When the oven is connected to the electricity supply or after a power cut, the clock must be
re-set.
. To set the clock :
1- Turn the control knob to the "Clock" symbol :
2- When the minutes flash, set the central button by turning to the "-" or "+" symbol.
Confirm by pressing the central button.
3- The hours will then flash, set with the central button by turning to the "-" or "+",
confirm by pressing the central button.
4- Turn back the control to the STOP position, the new hour is set.
all modification must be confirmed by pressing the central button.
this may be necessary if you have input an incorrect instruction. To stop
To lock the oven controls or the oven door, select the child safety device.
this protects the control panel and electronics from heat damage.
5
Advertisement
Table of Contents
