Table of Contents
Advertisement
The oven is equipped with a Pyrolytic cleaning system, which eliminates food deposits at high
temperatures. The operation is carried out automatically and odours are rendered "clean" by
passing over a Pyrolyser which starts as soon as cooking begins. As very high temperatures are
required by the Pyrolyser, the oven door is fitted with a safety lock which prevents the door from
being opened.
The Pyrolytic cycle can be stopped at any time. The door cannot be opened until the key indicator
is illuminated.
NB : if a hob is fitted above the oven, never use the hob during a Pyrolytic cycle, otherwise there
is a danger of overheating the oven control panel.
THREE PYROLYTIC CYCLES :
. ECO PYROCLEAN :
Operates at a temperature of 475°C for a period of 90 minutes.
. NORMAL PYROCLEAN :
Operates at a temperature of 475°C for a period of 105 minutes.
. SUPER PYROCLEAN :
Operates at a temperature of 475°C for a period of 120 minutes.
Never use commercially available cleaning products before carrying out a pyrolytic cycle !
Tip : carrying out Pyrolytic cleaning immediately after cooking allows you to take advantage of
residual heat, thus saving energy.
Before carrying out a Pyrolytic programme
- Remove all accessories from the oven : they cannot withstand the high temperatures
and would be damaged by Pyrolytic temperatures.
- Remove any large spillages or stains before beginning the Pyrolytic cycle as excessively
large amounts of grease could ignite when subjected to the very high temperatures of the
Pyrolytic cycle.
- Close the oven door.
Starting the Pyrolytic cycle
1- Turn the function selector knob to position "P" (Pyrolytic).
2- Turn the central button in the appropriate direction according to the degree of soiling:
... ECO PYROCLEAN ... NORM PYROCLEAN ... SUPER PYROCLEAN ...
Confirm your choice by pressing the central button.
... The oven will start the Pyrolytic cycle.
The end of cycle time appears on the display and the symbols "cooking time" and
"Stop" also appear.
The thermometer begins the rising of the temperature. The corresponding indicator
light flashes until the temperature has been reached.
CLEANING - PYROLYTIC PROGRAMME
for moderate staining.
for normal staining.
for heavy staining.
15
Advertisement
Table of Contents
