Hoover H-OVEN 300 User Instructions
Hide thumbs
Also See for H-OVEN 300:
- User instructions (83 pages) ,
- User instruction (17 pages) ,
- User instructions (16 pages)
Related Manuals for Hoover H-OVEN 300
Summary of Contents for Hoover H-OVEN 300
- Page 1 USER INSTRUCTIONS OVENS CANDY HOOVER GROUP S.R.L. • Via Comolli 16 • 20861 Brugherio (MB) - Italy...
- Page 2 General Warnings • When you open the door after you have finished shatter. cooking, a few drops of water may come out of the • The oven must be switched off before removing door. It depends on the type of food you have the removable parts.
- Page 3 compromise the safety of the appliance and invalidate the guarantee. • Any excess of spilled material should be removed before cleaning. • A long power supply failure during an occurring cooking phase may cause a malfunction of the monitor. ln this case contact customer service. •...
-
Page 4: Table Of Contents
Summary General Instructions 1.1 Safety indications 1.2 Electrical safety 1.3 Recommendations 1.4 Installation 1.5 Waste management 1.6 Declaration of compliance 2.1 Overview Product Description 2.2 Accessories 2.3 First use Use of the Oven 3.1 Display description 3.2 Cooking modes Oven Cleaning and Maintenance 4.1 General notes on cleaning 4.2 Hydro Easy Clean Function 4.3 Maintenance... -
Page 5: General Instructions
1. General Instructions We thank you for choosing one of our products. For the best results with your oven, you should read this manual carefully and retain it for future reference. Before installing the oven, take note of the serial number so that you can give it to customer service staff if any repairs are required. -
Page 6: Declaration Of Compliance
By placing the mark on the appliance, we are confirming compliance Hereby, Candy Hoover Group Srl declares that the radio equipment is in to all relevant European safety, health and environmental requirements compliance with Directive 2014/53/EU. The full text of the EU declaration which are applicable in legislation for this product. -
Page 7: Use Of The Oven
3. Use of the Oven (According to model) 3.1 Display description WARNING : the first operation to carry out after the oven has been installed or following the interruption 1. Thermostat selector knob of power supply (this is recognizable the display pulsating and showing 12:00 ) is setting the correct time. - Page 8 8.0 or higher) devices. 2,0 W ports are connected and all wireless • If you already have a Hoover Wizard user profile, you can login using your network ports are activated: credentials. Starting from an oven that is not enrolled, STEP 3 putting the right knob on the Reset position.
- Page 9 In this case, we highly recommend you to bring the router near • Return to the Hoover Wizard App and wait for the App to detect the the appliance (if possible) or contact your internet provider to purchase a appliance.
-
Page 10: Cooking Modes
3.2 Cooking Modes Function T °C T °C Function (Depends on the oven model) Dial Suggested Range LAMP: Turns on the oven light. DEFROST: When the dial is set to this position. The fan circulates air at room temperature around the frozen food so that it defrosts in a few minutes without the protein content of the food being changed or altered. -
Page 11: Oven Cleaning And Maintenance
4. Oven cleaning and maintenance 4.1 General notes on cleaning The lifecycle of the appliance can be extended through regular cleaning. ACCESSORIES Wait for the oven to cool before carrying out manual cleaning operations. Clean accessories with a wet, soapy sponge before rinsing and drying them: Never use abrasive detergents, steel wool or sharp objects for cleaning, so avoid using abrasive detergents. -
Page 12: Removal And Cleaning Of The Glass Door
REMOVAL AND CLEANING OF THE GLASS DOOR 1. Open the oven door. 2.3.4. Lock the hinges, remove the screws and remove the upper metal cover by pulling it upwards. 5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove the second and third glass (if present)). 7. -
Page 13: Changing The Bulb
CHANGING THE BULB 1. Disconnect the oven from the mains supply. 2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type. 3. Once the defective bulb is replaced, replace the glass cover. 5. - Page 14 INSTALLATION 560 mm Opening / Apertura 460mm x 15 mm 595 mm 580 mm 546 mm 595 mm 22 mm If the furniture is equpped with a bottom at the back part, provide an 560 mm x 45 mm opening for the power supply cable. If the mounting of the plinth does not allow air circulation, to obtain the maximum performance of the oven it is necessary to create an opening of 500x10 mm or the same surface in 5.000 mm2...